CT-350/1/2/3 -Technophone (170-1060/1/2/3) (170-1066) NAM Programming Faxback Doc. # 9004 STEP 1, ENTER PROGRAM MODE: Type: *3001#1234500 Phone Responds: STORE NOT DONE STEP 2, PROGRAM CELLULAR PHONE NUMBER: Press: 0 2 Phone Responds: (previous phone #) Press and HOLD: until display is empty Type: Power Up Name, Phone #, and 02 Phone Responds: REPLACE CONTENTS? For example: MYPHONE 8173905555 02 Press: Phone Responds: STORED Note: The "Power Up Name" is optional. To enter a Power Up Name, Enter Alpha Mode by pressing the key, the ALPHA indicator appears. Press the # key that has the character on it you want repeatedly until the correct character appears. To enter an "L" for example, you would hit the "5" key 3 times. When done entering the characters press "ABC" key again. STEP 3, ENTER CARRIER PARAMETERS: Type: 0 3 Phone Responds: (previous parameters) Press and HOLD: until display is empty Type: cellular phone parameters and 03 (on the CT-352, add the Long Distance and International Code). For the CT-350/1/3 and Technophone : 00038*1*1*334*05*10 03 | | | | Home or System -------+ 333 for A | +----Group ID 334 for B | Channel | +--0 and Last Digit of Phone # For the CT-352: 00038*1*1*334*05*10#0111*1 03 | | | | | Home/System ----+ 333 for A | | +-------Internat Code ID 334 for B | +-----Group ID Channel | +--0 and Last Digit of Phone # Phone Responds: REPLACE CONTENTS? Press: STEP 4, ENTER LOCK/SECURITY CODE PARAMETERS: Type: 01 Phone May Respond: 911#*911#0*1234 Press and HOLD: until display is empty Type: 911#*911#0* Type (for the CT-350/353): 4 digit lock code (1234 is the default) Type (for the Technophone): 4 digit lock code (1234 is the default) Type (for the CT-351/352): 5 digit security code (12345 is the default) Note: The 0 in this section denotes "ENGLISH" language selection. Replace with a "1" for Spanish, a "2" for French. Type: 01 Phone Responds: REPLACE CONTENTS? Press: You are DONE. The phone must be turned off and then on again before it will recognize the new parameters. Always wait at least two hours after receiving the cellular phone number from the carrier before testing the phone. MENU LIST (on CT-352 press after menu #): 0 Lock Phone 5 Enable/Disable Key Tone 1 Change Carrier Priority 6 Ring Volume 2 Display Last # Dialed 7 Primary/Secondary NAM select 3 Call Timers 8 Send DTMF Tones 4 Turn ON/OFF Display Light CT-351/352 changing lock code: 1 1 then Security Code then New Lock Code then . Note: There is now a data interface for the CT-352 (17-1062), this CMC item will ONLY work with two PCMCIA modems. Fax machines and standard modems are NOT supported. No other data interface is available for ANY of these phones. (PN/ir-04/11/96)