Silicon Solar Cell  (276-0124)      Specifications     Faxback Doc. # 16412

Material:.................................Single (Mono) Crystaline Silicon
Electrical Outputs
   Voltage:......................................................0.55V
   Current:..................................................0.275 - .3 amp
   Voltage (at load):.............................................0.484V
   Current (at load):......................................0.250 - .275 amp
Light Level:............................1 Full Sun - based on standard test
                                       conditions which is solar irradiance
                                     of 1,000 W/M2, cell temperature of 25C
Temperature Effect:............Remember, it is light not heat that produces
                                  the power.  Cold temperatures have little
                              effect on power, however, very hot conditions
                           i.e. 100F+ will cause the voltage to drop lower.


(ALL-08/10/95)