100K Linear Potentiometer (271-0092) Specifications Faxback Doc. # 17920 Total Rotation Angle:.....................................300 degrees +/- 5 Nut Wring Strength:.......................................Less than 9 kg.cm Rotation Torque:................................................20-200 g.cm Shaft Lever Stop Strength:...........more than 6 kg.cm (static load)/60 sec Terminal Strength:..........................more than 500 g.cm/10 +/- 1 sec soldering heat 300 +/- 5 C/3 sec 200 g cm/10 +/- 1 sec resist change within +/- 2% Overall Resistance & Tolerance:................................100K +/- 20% Wattage Rating:.......................................................0.5 W Resistance Taper Measuring Point & Tolerance:....................50 % Point 40 - 60 % Residual Resistance:........................................less than 20/20 Slide Noise:..........................................................47 mV Insulation Resistance:.............................................DC 500 V Withstand Voltage:.........................................AC 500V 1 minute Specifications are typical; individual units might vary. Specifications are subject to change without notice. (IR/all-06/13/96)