5K Potentiometer  (271-1720)      Specifications       Faxback Doc. # 32642


Type: .......................................................... Audio Taper
Resistance: ........................................................ 5 KOhms
Tolerance: ......................................................... +/- 20%
Power Rating: ................................................... 0.25 Watts
Maximum Working Voltage: ......................................... 250 Volts
Resistance Taper Measuring Point: ................................ 50% Point
Resistance Taper Tolerance: ...................................... 10% - 25%
Residual Resistance: ........................................... < 3/10 Ohms
Tap Residual Resistance: ........................................ < 100 Ohms
Slide Noise: ....................................................... < 47 mV
Insulation Resistance: ............................. > 1000 MOhm (@ 500 VDC)
Withstand Voltage: ....................................... 500 VAC, 1 Minute

Shaft: ................................................................ 6 mm
Mounting Hole: ....................................................... 5/16"
Total Rotation Angle: .......................... 300 degrees (+/- 5 degrees)
Nut Wiring Strength: ..................................... less than 9 kg-cm
Rotation Torque: ................................ 20-200 g-cm (@ 50 deg/sec)
Shaft Lever Stop Strength: .............................. > 6 kg-cm / 60 sec
Terminal Strength: .............................................. > 500 g-cm
                                      soldering heat 300 +/- 5 deg C / 3 sec
                                        200 g-cm resist change within +/- 2%


(TLC/tlc-05/09/96)