24-Hour Digital Timer  
(610-1060)                 Preparations               Faxback Doc. # 34287

INSTALLING A BACKUP BATTERY

The timer requires one AA battery (not supplied) for memory backup power.
For the best performance and longest life we recommend an alkaline battery,
such as Radio Shack Cat. No. 23-557.

CAUTION:  Use only a fresh battery of the required size and type.

1.  To remove the battery compartment cover, press the tab on the cover
    then pull the cover away from the compartment.

2.  Insert the battery between the metal prongs on the inside of the cover,
    according to the polarity symbols (+ and -) marked there.

3.  Replace the cover.

NOTES:  If you won't be using the timer for a month or more, remove the
        battery.

        Leaving the battery removed for longer than 15 seconds clears the
        timer's clock and event settings.

        If the display dims or the timer does not work properly when you
        unplug the timer from the AC outlet, replace the battery.

WARNING:  Always dispose of old batteries promptly and properly.


SETTING THE CURRENT TIME

1.  Set PROG/RUN/TIME SET to TIME SET.

2.  Press HOUR to change the hour setting or MIN (minute) to change the
    minute setting.

    NOTES:  To rapidly change the hour or minute, press and hold HOUR or
            MIN.

            When changing the hour, be sure to set it to the correct AM or
            PM hour.

3.  Set PROG/RUN/TIME SET to RUN to see the current time.

NOTE:  The timer does not display the current time while PROG/RUN/TIME SET
        is set to TIME SET.

SETTING THE EVENT TIMES

Follow these steps to set the event on/off times.

1.  Set PROG/RUN/TIME SET to PROG.  The current setting of event number
    1 appears on the display.

    NOTE:  The timer automatically selects event number 1 each time you set
           PROG/RUN/TIME SET to PROG.

2.  To select a different event number or simply review the event settings,
    repeatedly press EVENT until the desired event number appears on the
    display.

3.  To set the selected event's time, press HOUR to change the hour or MIN.
    (minute) to change the minute.

    NOTES:  To rapidly change the hour or minute, press and hold HOUR or
            MIN.

            When changing the hour, be sure to set it to the correct AM or
            PM hour.

            To clear the selected event, press ON/OFF twice so 0:00 appears
            on the display.

4.  To set another event time, repeat Steps 2-3.

    NOTE:  The events are related in groups of two; 1/ON with 2/OFF, 3/ON
           with 4/OFF, and so on.  If you set one event time from a group,
           be sure you also set the other.  For example, if you set 1/ON
           (the "on" time), be sure you also set 2/OFF (the "off" time).

5.  When you finish, set PROG/RUN/TIME SET to RUN.

MAKING THE CONNECTIONS

To connect a device to the timer, simply plug the device into the 3-prong
outlet on the side of the timer.

To connect the timer to AC power, plug the timer's 3-prong plug into a
grounded standard AC outlet.


(LB/EB 08/06/96)