Ranger Body Scanner/Metal Detector
(630-3010)                 Features                   Faxback Doc. # 34295

1.  Power Switch - The power switch turns the unit ON/OFF.  When in the
                   forward position unit is "on" - press to back position
                   for "off".  To conserve battery life, always make sure
                   unit is OFF when not in use.

2.  Audio  Alarm - A miniature piezo transducer produces a high pitched
                   sound whenever metal is detected.  Using a smooth, even
                   sweep speed, you will note that the alarm is longer in
                   duration for larger objects, and shorter for small
                   objects.

3.  Light  Alarm - A visible indication is given at the same time as the
                   audio alarm when metal is detected with a red LED
                   indicator.

4.  De-Sense Push
          Button - When in operation, activating the De-Sense by pushing
                   with the thumb reduces sensitivity to metal by about
                   50%.  This feature is invaluable for scanning ankle area
                   on floors which contain large amounts of steel
                   reinforcement. In this manner the scanner will not react
                   strongly to the re-bar, yet will still effectively
                   locate weapons.

5.  Low  Battery
           Alert - The Audio Alarm also acts as a low battery indicator.
                   When the battery starts to get low, the Audio Alarm will
                   make a "chirping" sound instead of a smooth steady
                   indicator and the light alarm will blink on and off
                   rapidly when metal is detected; replace the battery as
                   soon as possible.

6.  Battery Cover - Two screws hold the battery cover in place.  To replace
                    battery, remove the battery cover and carefully dis-
                    connect the old battery.  Replace with new alkaline 9V
                    battery (if rechargeable battery is not used) and
                    replace battery cover.  Never attempt to re-charge an
                    alkaline battery. Always remove battery if unit will be
                    unused for 30 days or longer.

7.  Recharger-
    Earphone Jack - Located at the bottom of the housing, the recharger
                    earphone jack allows use of a nickel-cadmium
                    rechargeable 9V battery; this same jack also serves as
                    an earphone jack.  When the earphone plug is inserted
                    the piezo alarm is silenced and the LCD continues to
                    operate.  Use earphone Radio Shack No. 33-175.


(LB/EB 08/08/96)