5V Regulated Power  (277-0102)       Parts List        Faxback Doc. # 9524
Supply

This package contains a complete printed circuit board ready for parts to
be added.  To construct this Project Board, you'll need the following
parts.

                                                               Radio Shack
Symbol             Description                Quantity           Cat No.

C1, 2, 3     1000 uF, 35 Volt Electrolytic        3              272-1032
             Capacitor

C4           100 UF, 35 Volt Electrolytic         1              272-1028
             Capacitor

CR1          4 Amp, 50-PIV Bridge Rectifier       1              276-1146

L1           Pilot Lamp                           1              272-0323

S1           Pushbutton Switch                    1              275-0011

T1           Power Transformer (120 to 6.3V)      1              273-0050

VR1          RS7805 Voltage Regulator             1              276-1770

             Line Cord                            1              278-1255

             Aluminum "Mini-Box"                  1              270-0238

             Binding Post (1 red, 1 black)        1 set          274-0662

             4-40 X 1/2 " (12.7 mm) Screw         2              640-3011

             4-40 Nut                             2              640-3018

             1/4" (6.3 mm) Vinyl Grommet          1              640-3025

             No. 4 X 1/5" (6.3 mm) Spacer         2              270-1393

             No. 4 Insulating Washer              2              640-3009

Plus hardware, tools and solder.  The chassis listed above is a suggested
box for installing the project.  You might prefer other mounting styles -
select your own.

WARNING:  The transformer will have 120 volts across teh primary;
          therefore, it is very important that you insulate the unit
          properly.  Please use the insulators, spacers and grommet as
          recommended.

(ALL-01/25/95)