Archer Surge Protector  (610-2780)      Operation      Faxback Doc. # 9794

OPERATION HINTS:

*  The lighted On/Off switch tells you the power switch is operating.

*  If the On/Off switch fails to light, be sure the power strip is plugged
   in.  Then, reset the circuit breaker.

*  A neon indicator monitors spike protection.  If the indicator fails to
   light, the spike protection is no longer active.

   Note:  If the neon indicator does not light, but the On/Off switch is
   still lighted, the strip provides filter protection, but no spike
   protection.


(TLC/all-02/27/95)