SR2014 Satellite System
(160-2511)                  Hints and Tips            Faxback Doc. # 14915

CAN'T FIND KU SATELLITES AFTER ADDING UPGRADE.

When adding the KU band, you must use the following procedure:

    1. Delete C band satellites.
    2. Add KU band satellites.
    3. Re-add C band satellites.


NOTES:

   On C/Ku, C-Band is single-feed.  Ku Band is single-feed.
   If you have a Double C LNB, it is Dual.
   If you have a Double Ku LNB, it is Dual.
   Dual is for two of the same LNBs.
   To program Ku, you must delete C-Band.  Then program Ku.
   Be sure that in EF (Extra Feature) Mode (Sat Setup), 1 and 2 are
   single.



(TLC/ir-05/20/96)