Camcorder Light  (160-2010)        Operation           Faxback Doc. # 16082

Turn on the light and operate the camcorder.  Turn off the light when you
finish using it.

WARNING:  The light becomes very hot during operation and remains hot for
          several minutes after you turn it off.

          Allow the light to cool before you touch or store it.

          Keep the light away from flammable materials.

CAUTIONS:  Do not lay the light on plastic objects during or immediately
           after use.  Doing so could melt the plastic.

           Do not cover the light's cooling vents.  Doing so prevents
           proper cooling.

REPLACING THE HALOGEN BULB

Your light's halogen bulb provides about 50 hours of use.  You can order a
replacement bulb at your local Radio Shack store.  Follow these steps to
replace the bulb.

WARNING:  Be sure the bulb is cool before you try to replace it.

1.  Remove the front protector by turning it counterclockwise.

2.  Pull out the old bulb and insert the new bulb.

3.  Replace the front protector.


(ALL-07/21/95)