Three-In-One Easy  (150-1916)      Operation           Faxback Doc. # 16721
Remote

1.  Press the device key for the device you want to control.

2.  Point the 3-in-1 toward the device and press PWR to turn it on.

3.  Repeat Steps 1 and 2 for other devices.

4.  Point the 3-in-1 toward the device you want to control and press the 
    desired command keys.

    The command keys on the 3-in-1 work the same as the keys on the
    device's original remote control; however, the labeling might differ
    slightly.

5.  To turn off the last device you selected, press PWR.  To turn off other
    devices, press the device key for the device you want to turn off, and
    then press PWR.

PUNCH THROUGH

The punch-through feature lets you alternately control two different
devices without pressing the device keys for each one first.  Here's how
it works.

No device uses all of the 3-in-1's keys.  For example, a TV is often the
only deice that uses the VOL keys, and a VCR is usually the only device
that uses keys such as REWIND, FAST F, and RECORD.

When you press TV and then press VCR, any keys not used by the VCR can
still control the TV.

If your cable box or VCR has a volume control, you can turn off the punch-
through feature.  This allows your cable box or VCR to control the volume 
of your TV set (if it can already do so).

If you want to control the volume through your cable box, you must press
CBL first then the P key briefly.  For Example:

                        CBL - P - 9 - 9 - 9 - CBL - 
                               VOL (up arrow)

NOTE:  Do not press and hold P.

When the indicator blinks three times, you can control the volume through
your cable box.  To turn the punch-through feature back on, repeat the
procedure.

If you want to control the volume through your VCR, you must press VCR.
For example:

        VCR - P - 9 - 9 - 9 - VCR - VOL (up arrow)

NOTE:  Do not press and hold P.

When the indicator blinks three times, you can control the volume through
your VCR.  To turn the punch-through feature back on, repeat the procedure.

The punch-through feature does not work if the last two devices you select
have the same (or similar) keys.  For example, most TVs and VCRs have
channel keys on their remote controls.  In this case, you would have to
press the desired device key before you use the 3-in-1's channel keys.

AUTOMATICALLY SCANNING CHANNELS

S is a special key located between the VOL and CHAN keys.  It lets you
easily browse through channels on your TV, VCR, and cable box.  When you
press S, the 3-in-1 remote control automatically steps through the channels
of your TV, VCR, or cable box.

To stop scanning, press any key.

The following lists show which 3-digit codes to enter to set up the 3-in-1
for your remote controlled devices.

NOTES:  The 3-in-1 might not always have every command that your original
        remote controls have.

        Use the label included with the 3-in-1 to record the Manufacturers'
        Codes (Faxback Doc. # 16722) for your remote controlled devices.


(/all-08/28/95)