Video Processor  (150-1962)     Preparation            Faxback Doc. # 16806

CONNECTING THE VIDEO PROCESSOR

To install the video processor, choose the installation appropriate to your
system and connect the cables.

After you make all audio/video connections, plug the power supply's barrel
plug into the video processor's POWER jack. Then plug the power supply into
a standard AC outlet.

NOTES:  Use only the included power supply with the video processor.
        Another power supply could damage the processor and VCRs and
        present a fire hazard.  Contact your local Radio Shack store to
        order a replacement power supply.

        If you connect the video processor between two VCRs, consult both
        VCR's owner's manuals. Since the video processor only uses
        audio/video cables, you must select the AUX, LINE, or A/V input on
        the recording VCR.


(/all-09/05/95)