70-Channel Remote Control Cable Converter
(150-1287)                 Features                   Faxback Doc. # 18383

Your 70-Channel Remote Control Cable Converter is compatible with all cable
systems and gives you complete remote control selection of all cable 
channels (VHF, Mid-Band, Super-Band, and Hyper-Band).  You can also use the
remote control to make fine-tuning adjustments and to turn your TV on or 
off.

FINE TUNING Buttons [+]/[-] - let you adjust your cable converter so it
                              can accurately tune to frequencies in any
                              cable system.

  CHANNEL [\/]/[/\] Buttons - let you select or scan channels using 
                              identical buttons on the converter or remote 
                              control.

       Number Buttons (0-9) - let you directly select channels with the
                              remote control.

         SWITCHED AC Outlet - lets you control the on/off operation of your
                              TV or other electronic device with your
                              converter or remote control.

        [FLASH BACK] Button - lets you return to the last channel you
                              selected before the current channel.

             [TIMER] Button - allows you to set the timer to automatically
                              turn off the converter and the SWITCHED AC
                              power outlet.

HOW THE REMOTE CONTROL CABLE CONVERTER WORKS

The signals for all cable channels in your area are sent to your home by
either one or two cable wires.  When you select a cable channel, the 
converter transmits the cable signal through channel 3 or 4 of your TV's 
tuner, also known as your cable output channel.  Once you select you cable 
output channel, you can use the converter or remote control to select the
desired channels.

Important Note

The remote control cable converter will not decode "scrambled" premium
channels.  You may, however, use it in conjunction with the cable box
provided by the cable company.  This will allow you to receive the premium
channels and still have remote control of all other channels.

ACCESSORIES

  75/300-Ohm UHF/VHF/FM Matching Transformer-converts your 75-Ohm
  UHF/VHF/FM coaxial cable to 300 Ohms for proper connection between your
  TV and your cable converter.

  75-Ohm UHF/VHF/FM Coaxial Cable with F-Type Connectors-connects your TV's
  75-Ohm terminal to your cable converter's TV SET terminal.


(CS/ 11/29/95)