Bracket Light with Condenser Lens
(160-2030)                 Preparation                Faxback Doc. # 19116

INSTALLING THE MOUNTING BRACKET

1.  Mount the bracket on the camcorder the same way you normally mount the 
    camcorder's rechargeable battery. 

2.  Position the reversible arm on the mounting bracket to either side,
    then press down on the arm's base until it clicks into place.

Remove the mounting bracket from the camcorder in the same way that you 
normally remove the battery. 

ATTACHING THE RECHARGEABLE BATTERY

After you install the mounting bracket on the camcorder, align the
battery's contacts with those on the mounting bracket.  Then press down the
battery from the top until it clicks into place. 

NOTE:  To remove the battery from the mounting bracket, just push the
       battery from its right side and then lift it off.


(/all-02/15/96)