Deluxe DSS System
(160-2530)   Alternate Audio Program/Other Features   Faxback Doc. # 19681

ALTERNATE AUDIO PROGRAMS

Alternate Audio allows you to select different audio programs to be played
with the video (when available).  For example, audio broadcast in a second
language may be available for certain programs.

There are two ways to change the audio:

1.  Press ALT AUD on the remote.

    or

2.  Point to Alternate Audio from the Main menu and press SELECT.

ALT AUD Remote Button

Temporary audio selections are made by pressing ALT AUD on the remote.  All
the available audio types are selected one after another as you continue
pressing the ALT AUD button.  Once selected, the chosen audio remains
selected until it is changed or until the DSS receiver is turned off.

Alternate Audio Display Screen

When you select Alternate Audio from the Main menu, the Alternate Audio
display screen comes up.

Point to the audio program type you wish to hear and press SELECT.  A check
mark next to the program means you have selected that program.  The DSS
system will then automatically set the audio program to the selected audio
program type, when that type is available.

OTHER FEATURES

The following paragraphs describe several DSS system features, but don't
provide step-by-step instructions.  Explore the menu system, if for no
other reason than to find out about the different features.  Just remember
the point and select method, and use the on-line Help where it is available
if you need more information.

Picture Size

The Picture size display screen allows you to choose between a standard TV
screen and a Cinema option.  A standard TV screen has an aspect ratio of
4:3; the Cinema option has an aspect ratio 0f 16:9.

NOTE:  You should only use the Cinema option if you have a CinemaScreen R
       TV:  using the Cinema option on a standard TV screen could crop 
       the picture.

System Test

The System Test display screen allows you to initiate diagnostic procedures
on the DSS system.  You should use this when your receiver doesn't seem to
be working correctly.  There are four separate tests:  signal, tuning,
phone and access card.

A message screen appears, telling you whether the system passed each test.
If your system fails a test, run the system test several times before
concluding that there is a problem.  Occasional fluctuations in the phone
line or satellite signal can give temporary false readings.

New Access Card Setup

Periodically, your program provider may issue you a replacement access
card.  The New Access Card Setup display screen allows you to transfer the
information from the old card, onto the new one.

Follow the display screen prompts to initialize your new card.  Once you
have transferred the information to the new card, your old card becomes
invalid.

NOTE:  Because your specific account information and custom settings are
       stored in the access card, power failures should have no effect on
       your DSS system.


(CS 1/5/96)