Video Enhancer/Stereo  (150-1961)     Connections      Faxback Doc. # 3886
Audio Mixer

INPUT CONNECTIONS

Connecting a Camcorder or VCR

1.  Connect your playback camcorder/VCR's video output jack to the
    enhancer/mixer's VIDEO IN jack.

2.  Connect your playback camcorder/VCR's audio output jacks to the
    enhancer/mixer's AUDIO IN jacks using the following guidelines.

    If your playback camcorder/VCR is stereo, connect the left and right
    audio output jacks to the enhancer/mixer's left and right AUDIO IN
    jack.

    If your playback camcorder/VCR is monaural, connect the audio output
    jack to the enhancer/mixer's left AUDIO IN jack.

Connecting an Audio Source

Connect the audio source's (such as a playback VCR, CD, cassette tape
deck, tuner, or turntable) left and right output jacks to the
enhancer/mixer's left and right MUSIC IN jacks.

Connecting a Microphone

To add narration into the recording, connect a microphone (not supplied)
to the enhancer/mixer's front MIC jack.  The microphone must have a 1/8
inch mini plug.  (We recommend Cat. No. 33-1060).

NOTE:  Radio Shack offers a wide selection of microphones to choose from.

OUTPUT CONNECTIONS

Connecting a VCR

1.  Connect the enhanced/mixer's VIDEO OUT jack to the recording VCR's
    video input jack.

2.  If your VCR is stereo, connect the enhancer/mixer's left AUDIO OUT
    jack to the VCR's left audio input jack.

    If your VCR is monaural, connect the enhancer/mixer's left AUDIO OUT
    jack to the VCR's left audio input jack.

NOTE:  Be sure your VCR's audio and video output jacks connect to your
       TV/monitor's audio and video input jacks.

Connecting Headphones

To monitor the sound level while recording, connect a pair of stereo
headphones (not supplied) to the enhancer/mixer's front PHONES jack.  The
headphones must have a 1/8-inch mini plug.  (We recommend Cat. No. 33-
1022).)

Hearing Comfort and Your Health

To protect your hearing, follow these guidelines when you use headphones.

    Always start by setting the volume to the lowest level possible before
    you begin listening.  Put the earphone or headphones on, then
    gradually increase the volume as necessary.

     Do not listen at extremely high volume levels, especially using an
     earphone.  Extended, high-volume listening can lead to permanent
     hearing loss.

    Once you set the volume, do not increase it.  Over a period of time,
    your ears adapt to the volume level, so a volume level that does not
    cause discomfort might still damage your hearing.

CONNECTING AC POWER

Connect the supplied AC adapter's barrel plug to the 12V DC jack.  Connect
the AD adapter's other end to a standard 12V AC outlet.

CAUTION:  Use only an AC adapter that supplies 12 volts DC, delivers 100
          milliamps, and has a center positive plug.  Using an adapter
          that does not meet these specifications could damage the
          enhancer/mixer or the adapter.

(ALL-01/03/95)