Color Eagle 100 VHF/UHF/FM Antenna
(150-1808)                 Mounting                   Faxback Doc. # 31392

Follow these steps to install you antenna.

1.  Place the antenna on or near your TV set or FM receiver.

2.  Connect the antenna's black twin-lead cable to your TV's 300-ohm
    VHF terminals.

3.  Connect the antenna's gold twin-lead cable to your TV's UHF
    terminals.

MOUNTING THE ANTENNA ON A WALL

Your antenna comes with a bracket and two screws for mounting the antenna
on a wall.

NOTE:  The supplied screws are suitable for mounting the antenna on wood or
       sheet-metal surfaces.  If you mount the antenna on sheet-rock or
       other soft material, we recommend that you use molly bolts to secure
       the mounting bracket.

1.  Select a convenient location for the antenna that is near the TV
    set or FM receiver.  Then, use the mounting bracket as a template to
    mark the two mounting holes.

2.  Attach the supplied mounting screws to the marked locations.  Then,
    tighten the screws until they extend about 3mm from the mounting
    surface.

3.  Hang the mounting bracket on the screws with the hooks pointing upward.
    Then, tighten the screws to secure the mounting bracket.

4.  Align the antenna base's three mounting holes with the mounting
    bracket's three hooks.  Then, push down on the base to secure it
    on the bracket.

5.  Adjust the antenna assembly to an angle that allows free movement for
    the UHF loop antenna.


(SP/yo 3/19/96)