Amplified UHF/VHF/FM Antenna
(150-1611)                 Connections                Faxback Doc. # 31398

ANTENNA WIRING CONNECTIONS

FOR ONE TV AND/OR FM RECEIVER

Use a single piece of 75-ohm coaxial cable with F-type connectors between
the terminal on the antenna and the terminal on the power injector.

CAUTION:  You must not split the signal or install any device (except a
          grounding block, for outdoor installations) between the antenna
          and the power injector.

Install the supplied VHF/UHF/FM splitter between the power injector and
your TV and/or FM stereo receiver.

Plug the adapter into the power injector before you plug the adapter into
an AC outlet.

For mobile operation, you may plug the power injector into a vehicle
cigarette lighter, using the optional cigarette lighter power cord
(270-1534).

FOR MORE THAN ONE TV AND/OR FM RECEIVER

Follow the instructions for one TV and/or FM receiver as stated above,
except add a 75-ohm splitter (15-1141) between the power injector and the
VHF/UHF/FM splitters.

You will need an additional VHF/UHF/FM splitter, such as our 15-1139 or
15-1252, for the second TV/Receiver; the splitter you need depends on the
type of inputs your TV/receiver has (75- or 300-ohm).


(SP/yo 3/19/96)