Archer Color Supreme 200 Antenna
(150-1831)                 Features                   Faxback Doc. # 31405

The Archer Color Supreme 200 Amplified VHF/UHF/FM Indoor Antenna lets you
watch your favorite local programs with improved reception.  With this
indoor antenna you can manually adjust the telescoping VHF/FM dipoles for
better VHF reception and FM sound.  You can also improve the UHF reception
with the antenna's fine tuning knob.

LOW NOISE AMPLIFIER - boosts weak signals by 20dB without adding visible
                      noise.

   AMPLIFIER SWITCH - lets you adjust the amplifier for a strong signal or
                      a weak signal.

        FINE TUNING - lets you precisely tune your antenna for each
                      channel.

  EASY INSTALLATION - lets you spend your time watching your TV, instead of
                      assembling a complicated antenna system.

WARNING:  To avoid possible fire or shock hazards, never expose this
          antenna to rain or moisture.  This antenna is for indoor use
          only.

ASSEMBLING THE ANTENNA

To assemble the antenna, follow these instructions:

1.  Place the reflector panel inside the UHF loop until the panel's small
    knobs fit into the holes on both sides of the loop.

2.  Remove the antenna's housing-pedestal cap.

3.  Insert the UHF loop's legs into the round holes in the pedestal and
    push down on the legs until they fit into place.

4.  Replace the cap.

5.  Screw the VHF dipoles into their holders.


(SP/yo 3/19/96)