Surround Sound Amplifier
(150-1279)                  Connections               Faxback Doc. # 31786

Connecting the Speakers

You can surround sound in either of two ways--to power front and rear
speakers or to power rear only.

Powering the front and rear speakers:  Set speakers button on rear to
NORMAL.  Run wires from front and rear speakers to the unit box for R and
L, positive (+) or negative (-) terminal.

Powering only the rear speakers:  If you are connecting only the rear
speakers to the Surround Sound Amplifier,. you must use your stereo system
to power the front speaker.  Connect the rear speakers to the BTL terminals
and not the rear speaker terminals.  Doing this delivers the full power of
the amplifier to the rear speakers.  When only rear speakers are connected
to the surround sound amplifier, set the speaker's switch to BTL.  Connect
the FRONT OUT jacks to the AUX or TAPE-IN jacks on your stereo system
amplifier, using shielded cables with PCA-type connectors.


(IR-04/03/96)