Portavision Black And White VHF/UHF TV With AM/FM Radio
(160-0124B)                Operation                  Faxback Doc. # 31848

TV OPERATON

1.  Turn VOLUME toward the left to turn on the TV/radio.

2.  Set TV/AM/FM to TV.

3.  Set VHF-LO/VHF-HI/UHF to the desired band.

    Channels:                        Switch:
    2 through 6                      VHF-LO
    7 through 13                     VHF-HI
    above 13                         UHF

4.  Slowly turn TUNNING to the desired station.

5.  Adjust the built-in telescoping antenna for the best picture and
    sound.

6.  Turn BRIGHT and CONTRAST on the back of the TV/radio until the desired
    picture appears.

7.  Turn V-HOLD on the back of the TV/radio to stop a TV picture's
    vertical roll.

8.  Turn VOLUME to the desired sound level.

9.  Set the Portavision's stand so the TV/radio resets at an angle which
    is comfortable to watch.

TV Reception Tips

If the image is blurry, unstable or has "snow", the signal reception may be
weak.  This can be caused by your location or the telescoping antenna. 
Building made with large amounts of steel can cause reception problems. 
Try changing the position and length of the antenna.  If this does not
help, use an outdoor antenna.

If the image does not fill the screen during battery power operation, the
batteries are weak.  Check and replace the batteries as needed.

RADIO OPERATION

1.  Turn VOLUME toward the left.

2.  Set TV/AM/FM to AM or FM as desired.

3.  Slowly turn TUNING to the desired station.

4.  Turn VOLUME to the desired sound level.

Radio Reception Tips

If FM reception is weak, this is generally caused by problems similar to
those described in "TV" Reception Tips."  Use a outdoor antenna for very
weak stations.

If AM reception is weak, this may be due to the distance of the station or
operation of the TV/radio in a building with steel construction.  Turn the
TV/radio in different directions for the best reception.


(LB-12/06/95)