Model 23 Cable-Ready HQ VCR
(160-0511A)                  Operation                Faxback Doc. # 32450

SETTING TIME AND DAY

1.  Press [PROG] so that CLOCK SETTING mode appears on the screen and/or
    SUN flashes on the display.

2.  If you are not setting the clock for the first time after plugging in
    the VCR, the VCR does not enter the clock setting mode automatically.
    You must press [DOWN] or [UP] to select the clock setting mode on the
    TV screen and/or VCR display.  Then press [ENTER] to enter the clock
    setting mode.

3.  Press [UP] or [DOWN] until the correct day indicator lights.

4.  Press [ENTER].  The hour digits flash.  Press [UP] or [DOWN] until the
    correct hour is displayed.  The Model 23 uses a 24-hour a.m./p.m.
    clock.  Be sure that a.m. or p.m. is correctly displayed.

5.  Press [ENTER].  The minute digits flash.  Press [UP] or [DOWN] until
    correct minute is displayed.

6.  Review the entered information.  If it is correct, press [PROG].  The
    on-screen menu disappears and/or the VCR display changes to the clock
    mode.  If the information is not correct, do not press [PROG] and
    return to step 3.  If you press [PROG] before noticing the incorrect
    information, return to step 2.

If the display shows an abnormal reading, or no reading, unplug the power
cord for a few seconds.  Then plug it back in.


(IR-05/02/96)