Model 11 9-Inch TV/VCP
(160-0404)              Remote Control Operation      Faxback Doc. # 32732

INSTALLING THE REMOTE CONTROL'S BATTERIES

The TV/VCP's remote control requires two AA batteries.  We recommend
alkaline batteries, such as Radio Shack Cat. No. 23-552.  Follow these
steps to install the remote control's batteries.

1.  Open the battery compartment by sliding the compartment cover in
    the direction of the arrow.

2.  Install two AA batteries according to the polarity symbols (+ and -)
    marked inside the compartment.

3.  Replace the compartment cover.

USING THE REMOTE CONTROL

The remote control's buttons have the same functions as the buttons on
the TV/VCP's front panel.

To use the remote control, point it at the TV/VCP's infrared remote window
and press the desired button(s).

NOTE:  If the remote control does not operate normally or does not work
       at all, replace both batteries.


(LB/all-05/14/96)