14-INCH 82-CHANNEL OMNIDIRECTIONAL TV ANTENNA
(150-1625)                 Preparation                Faxback Doc. # 32741

Pre-Installation Test

To make sure your antenna system works properly before installing it, do
this pre-installation test first.

1.  Connect a temporary 75-Ohm cable between the power injector's ANT 75
    Ohm jack and the antenna's F-connector.

    NOTE: If installing new lead in cable, connect the actual cable to be
          used in the installation.

2.  Connect the power injector's TV cable to your TV's VHF/UHF 75-Ohm
    F-connector.

3.  Insert the supplied AC adapter's small plug into the DC 12V jack on the
    power injector.

    NOTE: If installing the antenna in a motor home, we recommend you use a
          DC cord, such as Cat. No. 273-1533 (not supplied).

4.  Plug the supplied AC adapter into a standard AC outlet.  If the power
    injector's indicator lights, the antenna is properly connected.


(RMF/EB 4/29/96)