Model 43 Stereo Hi-Fi VCR
(160-0613)                 Accessories                Faxback Doc. # 32915

Your Model 43 VCR is packed with the remote control and several connection
accessories (shown below).  Be sure that all accessories are removed before
disposing of the packing material.

   The 75-Ohm Cable is used to connect the VHF/UHF OUTPUT terminal on the
   VCR to the antenna terminals on your TV.  If your TV has separate VHF
   and UHF terminals, you must also use the provided VHF/UHF band splitter.

   The VHF/UHF Band Splitter is used (with the 75-ohm cable) to connect the
   VHF/UHF OUTPUT terminal on the VCR to a TV that has separate VHF and UHF
   terminals.

CONTROL LOCATIONS

You operate many of the VCR's functions using controls located in the
compartment along the lower edge of the front panel.


(BR/EB 5-2-96)