SR-2015 Home Satellite Television System Receiver (160-2513) Safety Faxback Doc. # 34191 IMPORTANT SAFETY INSTRUCTIONS This satellite receiver is made and tested to meet exacting safety standards. It meets both UL and FCC requirements. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Power Lines - Locate an outdoor antenna away from power lines. Nonuse Periods - Unplug the receiver's power cord when you will not use it for an extended period. Outdoor Antenna - If an outside antenna or cable system is connected to the Grounding receiver, ground the antenna or cable system so as to provide some protection against voltage surges and built- up static charges. Article 810 of the National Electri- cal Code, ANSI/NFPA 80, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Note to the Cable TV System Installer: This reminder is provided to call the CATV system installer's attention to article 820-40 of the NEC (National Electrical Code) that provides guide- lines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Careful attention is devoted to quality standards in the manufacture of your receiver, and safety is a major factor in its design. However, safety is also your responsibility. This section lists important information that will help you properly use and enjoy your receiver and accessories. Read all the included safety and operating instructions before using your receiver, follow them closely, and retain them for future reference. Heed Warnings - Follow all warnings on the product and in the operating instructions. Cleaning - Unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Attachments - Do not use attachments/accessories not recommended by the product manufacturer, as they might create a hazard. Water and - Do not use this product near water (for example, near a Moisture bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool). Accessories - Do not place this product on an unstable cart, stand, tripod bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer's instructions for mounting, and use a recommended mounting accessory. Carts - Move the product on a cart carefully. Quick stops, excessive force, and uneven surfaces can cause the product/cart to overturn. Ventilation - Slots and openings in the cabinet provide ventilation, ensure reliable operation, and protect from overheating. Do not block or cover these openings, and do not place the product on a bed, sofa, rug, or other similar surface. Do not place the product in a built-in bookcase or rack unless it provides proper ventilation as speci- fied by the manufacturer. Power Sources - Operate this product using only the power source indicated on its marking label. If you are not sure of your home's power type, consult your product dealer or local power company. Polarization - This product is equipped with a polarized AC line plug (a plug having one blade wider than the other). This plug will fit in the power outlet only one way. This is a safety feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If you need an extension, use a polarized cord. Power-Cord - Route power-supply cords so they are not likely to be Protection walked on or pinched by items placed on or against them, paying particular attention to cords at plugs convenience receptacles, and the point where they exit from the product. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and dis- connect the antenna or cable system. This will prevent damage to the product due to Lightning and power-line surges. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock. Objects and - Never push objects of any kind into this product through Liquids openings, as they might touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to quali- fied service personnel. Damage Requiring - Unplug this product from the wall outlet and refer Service servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If the product has been dropped or damaged in any way. When the product exhibits a distinct change in perfor- mance. Replacement - When replacement parts are required, be sure the service Parts technician uses replacement parts specified by the manufacturer or having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check - Upon completion of service or repairs to this product, ask the service technician to perform Safety checks to determine that the product is in proper operating condition. Wall or Ceiling - The product should be mounted to a wall or ceiling only Mount as recommended by the manufacturer. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. (BR/EB 7/25/96)