PRO 847  Camcorder  
(160-0865)                 Optional Accessories       Faxback Doc. # 34700

We invite you to take a look at some great ideas for sparking creativity
and adding to the fun of using your compact VHS camcorder.  The following
pages have a selection of accessories to help make your memorable moments
look and sound even better.

These accessories are designed to make the process of recording and
watching your videos more enjoyable.

To order accessories, contact your local Dealer.

If a dealer is not nearby, all accessories are available through toll-free
ordering.

AC201A Soft Carrying Case

Custom compact soft case designed especially to provide protection and
utility for your compact VHS camcorder and most accessories.  Rugged fabric
lined with soft non-abrasive material and generous padding. Has adjustable
dividers for custom fit for lens filters, adapters, batteries, and tapes.

Coaxial RF Cables

These RF cables are used with the RF output adapter to connect your
camcorder to a standard TV (one without audio/video input jacks) for
playback.  If your TV has 300 Ohm antenna screw terminals, you will need an
optional 75-to-300 Ohm transformer such as VH54.  If your antenna cable is
the flat twin-lead type attached by two screws, you will also need an
optional 300-to-75 Ohm transformer.

CPS801C AC Adapter/Charger

This adapter/charger and the optional DCC100 DC cable enable you to operate
your camcorder directly from standard household power.  It operates on 100-
240 volts, 50/60H.

It will also charge the 234330 and 234329 battery.

CAUTION:  Do not use any other adapter/chargers with this camcorder.

DCC100 DC Cable

This DC cable lets you connect the CPS801C AC adapter/charger or the DCC05
DC car cord adapter/charger directly to the camcorder.

CRF800 RF Output Adapter

This adapter is used with a coaxial RF cable to connect your camcorder to a
standard TV (one without audio/video jacks)

VH54 Cable Transformer

This 75-to-300 Ohm transformer is used to connect a standard 75-Ohm antenna
cable (such as VH82 or VH90) to the 300 Ohm screw terminals on a TV.

AH25 Y-Adapter

This Y-adapter allows you to connect your camcorder's mono audio cable to a
stereo TV or VCR.

Using the Optional AC088 Tripod

Monitoring the camcorder on a tripod such as AC088, will keep the camcorder
steady and produce excellent video results.

This tripod's fluid-effect head provides smooth camera pan and tilt.  The
quick-release mount makes it easy to attach or remove the camcorder.  The
grooved, tubular 3-section leg design folds down to 26" when not in use.
Rubber feet allow for sure footing.

CAUTIONS:  Before using a tripod, make sure it is stable enough to hold the
           camcorder without falling over.  Do not transport the camcorder
           attached to the tripod.

           When attaching your camcorder to a tripod, be carefully not to
           force the tripod screw into the camcorder's tripod mounting hole.

           The tripod screw should not protrude into the camcorder more
           than approximately three-eighth (3/8) inch.  Forcing the screw
           could damage the mounting hole on the bottom of the camcorder.

           All specifications and descriptions of accessories are subject to
           change without notice.


(LB/EB 09/19/96)