VHF/UHF/FM Indoor Antenna
(150-1836)                 Installation               Faxback Doc. # 9016

Follow these steps to install your antenna.

NOTE:  If your TV's or stereo's FM antenna terminal is a 75-Ohm coaxial
       type, you need a short coaxial cable with F-connectors to connect
       the TV or FM receiver to the antenna's V/U 75-Ohm terminal.  Radio
       Shack stores sell a complete line of cables and other accessories.

1.  Place the antenna on or near your TV or FM receiver.

2.  Connect the antenna's gold twin-lead cable to your TV's UHF terminals.

3.  Connect the antenna's brown twin-lead cable or a 75-Ohm coaxial cable
    from the antenna to your TV's VHF terminals or your stereo's FM antenna
    terminal.


(CS 12/4/95)