V.34 Faxmodem (250-3037) Features Faxback Doc. # 14475 Your new Smart One 2842 fax/modem is a high speed error correcting telecommunication device that enables your computer to efficiently communicate with thousands of computers across the globe. You can use it to acquire information from a variety of data base services including Prodigy, CompuServe, Dow-Jones, Dun & Bradstreet, and MCI-Mail, to set up your own bulletin board, to attend live on-line conferences, download volumes of valuable information and much more. The Smart One family of modems, with its V.42bis capability and with a communication speed of 115,200 bps, literally turns your computer into a multi-functional data communication powerhouse. Besides allowing you to communicate with virtually any personal computer, the 2842 Send and Receive faxes from any group III fax machine directly from your computer at speeds of up to 14,400 bps. As a fax, it supports CCITT Recommendations V.17, V.29, V.27ter and V.21 channel-2. You can fax a document in background mode and continue to perform other computer tasks while it's processing. Your 2842VFC Voice Mail gives you multiple voice mailboxes, which you can assign to business associates, friends or family members. Urgent call paging and remote retrieval allow you to get and respond to important messages immediately. The Call Discriminator automatically distinguishes if your call is a fax, a modem message or a voice call. And, the Fax/Voice Mailbox lets you receive faxes and voice mail using a single phone line. Configuration settings are programmable and are retained in a nonvolatile memory (NVRAM) on the Smart One 2842, allowing Plug-and-Play operation. The Smart One 2842 is fully compatible with V.Fast and CCITT Recommendations V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A, 103 operating mode and Automode. It supports CCITT V.42bis (BTLZ, MNP 5) data compression and V.42 (LAPM, MNP 4) error detection protocols delivers maximum performance and compatibility for global connectivity via multi- mode operation. The Smart One 2842 is approved by the Federal Communication Commission (FCC) for direct connection to any telephone system in the United Stales, for both pulse and Touch-Tone dialing. Provided that a communication software is active in your computer, you may type in the AT commands to operate the fax/modem or use the software commands to issue the appropriate commands to your fax/modem. The Smart One 2842 can automatically dial or answer calls and also match the speed and protocol with its Automode feature. It can operate over a dial-up as well as a leased line and can operate in both synchronous and asynchronous modes. (ALL-04/03/95)