Citizen PROjet II (260-2957) Printer Setup Faxback Doc. # 14702 Factory Settings When you receive the printer, its basic operating parameters are already set with pre-defined values (default values). These factory setting will probably meet your requirements. If they do not, you can change them, using the SET-up procedure. CAUTION: Always switch off the printer before changing the positions of the SET-UP selectors, as their position is read only at printer switch-on. The factory settings, indicated by the OFF position of the selectors, are: Feature Default Value Font Courier 10 Print Style Upright Print Pitch Normal Print Orientation Portrait Print Quality Letter Quality Paper Handling Paper tray Perforation Skip Enabled Text Scale Mode Disabled Graphic Density 75 dpi Automatic Line Feed Disabled (CR=CR) Ink Detection Enabled Ink Save Mode (Graphics) Enabled Ink Save Mode (Text) Enabled Paper Size Letter (8.5 x 11 inches) Character Set CP 437 International Parameter Selection Procedure Access to the SET-UP Selectors CAUTION: To redefine the programmable parameters using the printer SET-UP procedure, the printer must be switched off. Open the top cover of the printer and the selector cover. On the inside of the top cover, there is an engraved template which indicates the parameter assigned to each selector. The names of the parameter groups are also engraved on the inside of the selector cover. How to Select the Parameter Settings Each selector has two positions: OFF : down (default position) ON: up (alternative value for each specific parameter). To alter the setting of the parameter(s), just change the position(s) of the specific selector(s). Termination of SET-UP Process Once you have completed the selection of the parameter values you require, close the selector cover and the top cover, then switch on the printer. Each time you turn on the power, the printer "reads" the position of the selectors and will be ready to print with the features you have defined. Programmable Features The 33 selectors are assigned to the programmable parameters singly, or in some cases, in groups (for FONT, PAPER FORMAT, CHARACTER SET). Starting from the left, the selectors are designated as follows: A group of six selectors, numbered 1 to 6, which select the font. Fourteen selectors, indicated alphabetically, which select individual print attributes and features. A group of three selectors, numbered 1 to 3, which select the paper format. A group of six selectors, numbered 1 to 6, which select the character set. A group of four selectors, numbered 1 to 4, which are reserved. Resident Emulation (HP Desk Jet Plus) Starting from the leftmost selector, the following parameters can be defined: FONT The first six selectors on the selector bar define the print font to be used. When selecting a resident font other than the default value (COURIER 10), ONLY the specific selector should be raised; the other five other five MUST all remain down. 1 2 3 4 5 6 COURIER 10 COURIER 16.6 ON LETT. G. 10 ON LETT. G. 12 ON LETT. G. 16.6 ON TIMES NORDIC ON EXTERNAL FONTS ON NOTE: For information on the resident fonts available, and their characteristics, see Appendix E. Print attributes and other features The features assigned to selectors A to N, engraved on the inside of the front cover are the alternative parameter values; i.e., they are the values implemented when the corresponding selector is set in its ON position. ITALIC A COMPRESSED B LANDSCAPE C DRAFT D MANUAL FEED ENABLED E PERFORATION SKIP F DISABLED TEXT SCALE MODE G GRAPHIC DENSITY 300 DPI H CR=CR+LF I INK DETECTION DISABLED L INK SAVE MODE (GRAPHICS) M DISABLED INK SAVE MODE (TEXT) N DISABLED RESERVED O RESERVED P The implementation of parameters A, B and C will depend on the font selected with the first six selectors on the selector bar. If, for example, the Times Nordic font is selected (selector 6 ON, selectors 1, 2, 3, 4 and 5 OFF), the selection of Landscape (selector C ON) will be ignored. Similarly, if an optional font containing only upright characters is selected from a font card, the selection of Italic (selector A ON) will have no affect. Selector Feature OFF ON A Print Style Upright Italic B Print Pitch Normal Compressed C Print Orientation Portrait Landscape D Print Quality Letter Quality Draft E Paper Feed Paper tray Manual Device F Perforation Skip* Perforation Skip Perforation enabled (BOF=.5in; Skip disabled TOF=.5 in) (BOF=.5 in; TOF=0 in) G Text Scale Mode Text Scale Mode Text Scale ** disabled Mode enabled H Graphic Density 75 dpi 300 dpi *** I Automatic Line Only carriage Carriage Feed (CR=CR) return with automatic line feed (CR=CR+LF) L Ink Detection Enabled Disabled (ON LINE LED flashes where there is no more ink in the print head) M Ink Save Mode Enabled Disabled (Graphics) N Ink Save Mode Enabled Disabled (Text) O Not currently assigned to any Reserved resident parameter. The position P of these selectors should not be altered. * Perforation Skip - see also command code ESC & I n L, Appendix F ** Text Scale Mode - see also command code ESC & k 6 W, Appendix F ***Graphic Density - see also command code ESC * t n R,Appendix F Paper Position the three selectors as indicated in the following diagram to select the paper size you require (Selector 3 in ON position=default value - Letter): 1 2 3 A4 LETTER ON LEGAL ON ENVELOPE ON ON FREE ON ON ON Character set Set the six selectors as indicated in the following diagram to select the character set you require (all selectors in OFF position=default value - CP 437 International equivalent to Hewlett -Packard's PC-8): 1 2 3 4 5 6 CP 437 INTERNATIONAL HP ROMAN 8 ON PC 8 DENMARK/NORWAY ON PC 850 (MULTILINGUAL) ON ON ECMA94 - LATIN 1 ON ISO4 - UNITED KINGDOM ON ON ISO 21 - GERMANY ON ON ISO 69 - FRANCE ON ON ON ISO 15 - ITALY ON ISO 60 - NORWAY ON ON ISO 61 - NORWAY 2 ON ON ISO 11 - SWEDEN NAMES ON ON ON ISO 10 - SWEDEN ON ON ISO 17 - SPAIN ON ON ON ISO 6 - USASCII ON ON ON ISO 2 - IRV ON ON ON ON ISO 16 -PORTUGAL ON ISO 14 - JIS ASCII ON ON LEGAL ON ON CP 860 - PORTUGAL ON ON ON DANISH OPE ON ON ON UNIX INTERNATIONAL ON ON ON DANISH OPE II ON ON ON SPAIN II ON ON ON ON CP 863 - FRENCH CANADIAN ON ON PC WIN (ANSI WINDOWS 3.1) ON ON ON CP 852 ON ISO 8859/2 ON ON PC WIN (EAST EUROPEAN WIN 3.1) ON ON CP 857 ON ON ON ISO 8859/9 ON ON PC WIN (TURKISH WINDOWS 3.1) ON ON ON CP 866 ON ON ON CP 855 ON ON ON ON ISO 8859/5 ON ON PC WIN (CYRILLIC WINDOWS 3.1) ON ON ON CP 210 ON ON ON CP 851 ON ON ON ON ISO 8859/7 ON ON ON PC WIN (GREEK WINDOWS 3.1) ON ON ON ON CP 862 ON ON ON ON ISO 8859/8 ON ON ON ON ON DEFAULT SET IN CARD ON ON ON ON ON ON Reserved These four selectors (1 to 4) are not currently assigned to any parameters in the resident emulation. 1 RESERVED 2 RESERVED 3 RESERVED 4 RESERVED CAUTION: The position of these selectors should NOT be changed. (LB/all-04/21/95)