Graffiti Reference Card  (250-3116) Connecting the PDA Faxback Doc. # 14965
                                        to your PC

Before you install the Graffiti software onto your PDA, you must connect
the PDA to an available serial (COM) port on your PC.

A PC-to-PDA serial null-modem cable (PalmConnect cable, Casio SB-82 or
Radio Shack #25-3101) is necessary for this connection.

To connect the PDA to your PC:

1.  On your PDA, locate the port labeled RS-232C.

2.  Connect the smaller end of the cable to the RS-232C port on your PDA.

3.  Connect the other end of the cable to an available serial (COM) port
    on your PC.  You can connect the cable directly if the serial port has
    a 9-pin connector; if the serial port has a 25-pin connector, use a 9-
    to-25-pin adapter.

If you need more information about connecting and using the RS-232C port,
refer to the user's guide supplied with your PDA.


(TE/all-04/26/95)