LP 410 (260-2889)           Epson Menu Listing         Faxback Doc. # 4078

You can customize your printer's functions to meet your special needs.  The
menu settings have three directories: MAIN, I/F, AND EMULATION (HPLJ3, IBM,
EPSON).  When you install the optional PDL cartridge, the PDL menu also
appears.  This section gives a brief explanation of each of the menu items
and their possible settings.  The asterisk (*) indicates the factory
setting for a menu item.

┌─────────────────────────────┐
│EPSON FX-850 Directory Menu: │
└─────────────────────────────┘
┌────────────┬──────────────┬─────────────────────────────────────────────┐
│ORIENTATE   │ PORT*        │ Selects the orientation of a page, PORTrait │
│            │ LAND         │ or LANDscape.                               │
├────────────┼──────────────┼─────────────────────────────────────────────┤
│CONDENS     │ NORMAL*      │ Selects normal or condensed characters.     │
│            │ CONDENS      │                                             │
├────────────┼──────────────┼─────────────────────────────────────────────┤
│ZERO SLASH  │ OFF*         │ Selects zero with slash or without slash.   │
│            │ ON           │                                             │
├────────────┼──────────────┼─────────────────────────────────────────────┤
│INTL CG     │ USA*         │ Selects the international character set.    │
│            │ FRENCH       │                                             │
│            │ GERMANY      │                                             │
│            │ UK           │                                             │
│            │ DENMK 1      │                                             │
│            │ SWEDEN       │                                             │
│            │ ITALY        │                                             │
│            │ SPAIN        │                                             │
│            │ JAPAN        │                                             │
│            │ NORWAY       │                                             │
│            │ DENMK 2      │                                             │
│            │ SPAIN 2      │                                             │
│            │ LATIN        │                                             │
├────────────┼──────────────┼─────────────────────────────────────────────┤
│SKIP-OVER   │ NONE         │ Selects/deselects 1-inch perforation skip   │
│            │ 1"*          │                                             │
├────────────┼──────────────┼─────────────────────────────────────────────┤
│AUTO LF     │ CR+LF        │ Selects the function of carriage return code│
│            │ CR*          │                                             │
├────────────┼──────────────┼─────────────────────────────────────────────┤
│CG TABLE    │ ITALIC*      │ Selects the character table.                │
│            │ GRAPH        │                                             │
├────────────┼──────────────┼─────────────────────────────────────────────┤
│TOP OF FORM │ 0            │ Sets the top margin to n/12 inch.           │
│            │ |            │                                             │
│            │ 3*           │                                             │
│            │ |            │                                             │
│            │ 12           │                                             │
└────────────┴──────────────┴─────────────────────────────────────────────┘

┌────────────────┐
│Using the Menu: │
└────────────────┘
Menu settings are stored in the printer's memory even after you turn off
power and they remain unchanged until you reprogram them.  Use the keys on
the operation panel to program the functions.  The setting you can change
flashes on the display.

1. With the printer off line, press FUNCTION to enter the menu programming
   mode.
2. Press UP ARROW or DOWN ARROW so the directory name you wish to change
   flashes on the display.
3. Press SET to enter the menu select mode.  The first menu item flashes.
4. Press UP or DOWN ARROW so the menu item you want to change flashes on
   the display.
5. Press SET to enter the change setting mode.  The current setting
   flashes.
6. Press UP or DOWN ARROW until the setting you want flashes on the
   display.
7. Press SET to return to the menu select mode. The menu item flashes.

   If necessary, repeat Steps 4 to 7 to program other settings.

8. Press FUNCTION to exit the menu programming mode.
9. Press CONTINUE/RESET to store the new settings into memory.

Note: The PAPER SET, MANUAL FEED, and THICK PAPER functions become valid
without pressing CONTINUE/RESET.  If you changed only these functions, you
do not need to press CONTINUE/RESET.

(dtc/BKL-06/20/96)