DMP 2130 (260-2845) Controls Layout Faxback Doc. # 4202 Layout of Printer Controls: Parallel Interface ┌────────────────┬─┬───────────────────────┬─┬────────▄▄▄▄▄▄─┐ │ │°│ Push │°│ │ │ │°│<───── Tractor ───────>│°│ │ │ │°│ Feed │°│ │ ├─┬──────────────┴─┴───────────────────────┴─┴───────────────┤ │ │ ├─┐ │ ├─┐ ├─┤Paper ┌─>█ │ │<── Print Head ├─┤Adjustment Power│ ┘ Adjustment ├─┤Knob Switch Lever ├─┘ ├─┴────────────────────────────────────────────┬────────────┬┤ │ │┌─────────┐ ││ │┌─┐ │└─────────┘ ││ Control ┌─>││█│┌┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┬┐│▄ ▄ ▄ ▄ ││ Panel │ ││ │││││││││││││││││││││││││││││││││││││││││││││┌─┐┌─┐┌─┐┌─┐││ (see below) │ ││ │││││││││││││││││││││││││││││││││││││││││││││└─┘└─┘└─┘└─┘││ │ │└─┘│││││││││││││││││││││││││││││││││││││││││││└────────────┘│ │ └───┤│││││││││││││││││││││││││││││││││││││││││├──────────────┘ Paper │││││││││││││││││││││││││││││││││││││││││││ Selector││││││││││││││││││││││││││││││││││││││││││ Lever │││││││││││││││││││││││││││││││││││││││││││ └┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┴┘ Front Paper Table Control Panel: ┌──────────────────────────────────────┐ │ ┌──────────────────────────────────┐ │ │ │ ON LINE │ │ <─── LCD Display │ └──────────────────────────────────┘ │ │ Power OnLine Alarm NLQ │ │ ▄▄ ▄▄ ▄▄ ▄▄ │ <─── LED Indicators │ ┌────────── Quiet ────────────┐ │ │ │┌────── Up ───────┐ │ │ │ ││┌ Down ─┐ │┌─ Park ─┐│ │ │ ┌─┴┴┴──┐ ┌──┴───┐ ┌──┴┴───┐ ┌──┴┴──┐ │ │ │NLQ/DP│ │ LF │ │FF/LOAD│ │ON/OFF│ │ <─── Keypad Controls │ │ │ │ │ │ │ │LINE │ │ │ └──────┘ └──────┘ └───────┘ └──────┘ │ └──────────────────────────────────────┘ Paper Selector Lever: Note: There are three positions on the paper selector lever. Free (toward the back): Set to this position to correct a paper jam. Tractor (center position): Set to this position when using fanfold paper. Friction (toward the front): Set to this position when using single-sheet paper. Power Switch: Rock the switch backward to turn on the printer. Rock the switch forward to turn off the printer. Control Panel: The control panel has four keypad controls, four LED lights, and one liquid crystal display (LCD). Faxback Document #4206 will provide specific instructions on using the control panel. Paper Adjustment Knob: Used to make adjustments to the print start position. Clockwise to advance the paper, counterclockwise to retract the paper. Print Head Adjustment Lever: Used to change the distance between the print head and platen. Downward to decrease the distance, upward to increase the distance. Faxback Document # 4210 will provide a more detailed use of the print head adjustment lever. (dtc-07/26/93)