DMP 105  (260-1276)          Dip Switches              Faxback Doc. # 4310

There are two switches located on the left rear side of the Printer. These
switches allow you to customize some of the DMP-105 features for your own
applications.

When you receive the DMP-105, all switches should be set to OFF (i.e. in 
the down position). By setting certain switches ON, before turning the 
DMP-105's power ON, you can select different baud rates and interface 
modes.

REMEMBER!! THE PRINTER POWER MUST BE OFF BEFORE YOU CAN CHANGE ANY OF THE
SWITCHES.
                  ┌───┬─┬─┬─┬──┬─┬─┬─┬───┐  /\
                  │   │ │ │ │  │ │ │ │   │   │ ON side
                  │   │ └─┘ │  │ └─┘ │   │   │
                  │   └─────┘  └─────┘   │   │
                  │                      │   │ OFF side
                  └──────────────────────┘  \/


POSITION│    SYMBOL      │       OFF             │        ON
────────┼────────────────┼───────────────────────┼───────────────────────
    1   │Parallel/Serial │Parallel Interface is  │Serial Interface is
        │                │available.             │available.
────────┼────────────────┼───────────────────────┼───────────────────────
    2   │2400 BPS/600 BPS│When the Serial Inter- │When the Serial Inter-
        │                │face is available,     │face is available, 
        │                │transmission rate is   │transmission rate is set
        │                │set to 2400 BPS.       │to 600 BPS.
────────┴────────────────┴───────────────────────┴──────────────────────────

(css/tmc-06/13/95)