DMP-2100 (26-1256) Control Codes Faxback Doc # 4601 * If Function Selection Switch 6 is set to OFF side, one line feed opera- tion is performed at the same time. *** These codes may not be able to send to the printer by your computer. In this case, use system command to send them. ┌─────────────┐ │Control Codes│ └─────────────┘ DEC. HEX. DP Mode WP Mode GR Mode Remarks ──────────────────────────────────────────────────────────────────────────── 00 00 DP: Ignored WP: Ignored GR: Ignored ──────────────────────────────────────────────────────────────────────────── 8 n 08 n DP: Backspace. (n=Binary) n:Backspaced dot number WP: Backspace. (n=Binary) n:Backspaced dot number GR: Ignored. Receives n as character data. Remarks: *** ──────────────────────────────────────────────────────────────────────────── 10 or 138 0A or 8A DP: Executive Line Feed. Executive LV in accordance with information latched WP: Full Line Feed. Executive. GR: 11/108" Line Feed. Executive... 8A hex. 138 dec. Remarks: *LF/NL Selectable. *** ──────────────────────────────────────────────────────────────────────────── 12 0C DP: Form Feed WP: Form Feed GR: Form Feed Remarks: LF/NL Selectable ──────────────────────────────────────────────────────────────────────────── 13 or 141 0D or 8D DP: Carriage Return (When NL, LF pitch is latched one) WP: Carriage Return (When NL, LF pitch is 1/6" (1/8") per line.) GR: Carriage Return only 0D Hex. (When NL, LF pitch is 7/72" per line.) Remarks: NL/CR selectable ──────────────────────────────────────────────────────────────────────────── 14 0E DP: End Underline WP: End Underline GR: Ignored ──────────────────────────────────────────────────────────────────────────── 15 0F DP: Start Underline WP: Start Underline GR: Ignored ──────────────────────────────────────────────────────────────────────────── 18 12 DP: Select Graphics Mode WP: Select Graphics Mode GR: Ignored ──────────────────────────────────────────────────────────────────────────── 19 13 DP: Ignored WP: Select DP Mode GR: Ignored ──────────────────────────────────────────────────────────────────────────── 20 14 DP: Select WP Mode WP: Ignored GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 n 1B n DP: Proportional spacing (2nd byte is dot column #) WP: Proportional spacing (2nd byte is dot column #) GR: Ignored Remarks: 1≤n≤9. *** ──────────────────────────────────────────────────────────────────────────── 27 14 1B 0E DP: Start Elongation WP: Start Elongation GR: Start Elongation ──────────────────────────────────────────────────────────────────────────── 27 15 1B 0F DP: End Elongation WP: End Elongation GR: End Elongation ──────────────────────────────────────────────────────────────────────────── 27 16 n1 n2 1B 10 n1 n2 DP: Positioning (3 Pitches are available)(n1,n2 indicate dot position from Home pos.) WP: Positioning (3 Pitches are available)(n1,n2 indicate dot position from Home pos.) GR: Positioning (3 Pitches are available)(n1,n2 indicate dot position from Home pos.) Remarks: n1, n2: Binary value. *** ──────────────────────────────────────────────────────────────────────────── 27 17 1B 11 DP: Select Proportional Character WP: Select Proportional Character GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 18 1B 12 DP: Select Correspondence Character-10 WP: Select Correspondence Character-10 GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 19 1B 13 DP: Select Standard Character-10 WP: Select Standard Character-10 GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 20 1B 14 DP: Select Condensed Character WP: Select Condensed Character GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 23 1B 17 DP: Select Standard Character-12 WP: Select Standard Character-12 GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 28 1B 1C DP: Set Half Forward Line Feed (No motion) WP: Half Forward Line Feed (Executive) GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 29 1B 1D DP: Select NLQ Compressed Character WP: Select NLQ Compressed Character GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 30 1B 1E DP: Set 1/2 Reverse LF WP: Perform 1/2 Reverse LF GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 31 1B 1F DP: Start Bold WP: Start Bold GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 32 1B 20 DP: End Bold WP: End Bold GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 49 1B 31 DP: 1/20 (1/120") Forward Line Feed (Executive) WP: 1/20 (1/120") Forward Line Feed (Executive) GR: 1/20 (1/120") Forward Line Feed (Executive) ──────────────────────────────────────────────────────────────────────────── 27 52 n 1B 34 n DP: Form Feed Set WP: Form Feed Set GR: Form Feed Set ──────────────────────────────────────────────────────────────────────────── 27 54 1B 36 DP: Set Full Forward Line Feed (No motion) WP: Ignored GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 56 1B 38 DP: Set 3/4 Forwrd Line Feed (No motion) WP: 3/4 Forward Line Feed (Executive) GR: Ignored ──────────────────────────────────────────────────────────────────────────── 27 71 1B 47 DP: 4/5 (2/15") Forward Line Feed (Executive) WP: 4/5 (2/15") Forward Line Feed (Executive) GR: 4/5 (2/15") Forward Line Feed (Executive) ──────────────────────────────────────────────────────────────────────────── 27 73 n1 n2 1B 49 n1 n2 d1 d2 d2 d1 d2 d2 DP: High Resolution Graphics (n1,n2 indicate point column length) (d1,d2,d3,... are Image data) WP: High Resolution Graphics (n1,n2 indicate point column length) (d1,d2,d3,... are Image data) GR: High Resolution Graphics (n1,n2 indicate point column length) (d1,d2,d3,... are Image data) ──────────────────────────────────────────────────────────────────────────── 27 75 1B 4B DP: Insert New Paper WP: Insert New Paper GR: Insert New Paper ──────────────────────────────────────────────────────────────────────────── 28 n1 n2 1C n1 n2 DP: Repeat Print Data (Undefined code is changed to X) WP: Repeat Print Data (Undefined code is changed to X) GR: Repeat Print Data (If MSB=0, Data is ignored) ──────────────────────────────────────────────────────────────────────────── 30 1E DP: Ignored WP: Ignored GR: End Graphic Mode ──────────────────────────────────────────────────────────────────────────── 127 7F DP: Ignored WP: Ignored GR: Ignored ──────────────────────────────────────────────────────────────────────────── 255 FF DP: Ignored WP: Ignored GR: (Printing Data) ──────────────────────────────────────────────────────────────────────────── Other Codes in Function Area(02 to 1F hex) DP: Prints "X" marks WP: Prints "X" marks GR: Ignored ──────────────────────────────────────────────────────────────────────────── Other Codes in Function Area (80 to 9F hex) DP: Prints "X" marks WP: Prints "X" marks GR: (Printing Data) ──────────────────────────────────────────────────────────────────────────── (tlc-8/06/93)