60 MB Tape Drive (250-4079A) Specifications Faxback Doc. # 5849 CAPACITY (AFTER ECC) 250-4079A w/205 ft DC2000 cartridge......................40.4MB; ~ 80MB w/compression 250-4079A w/307 ft DC2120 cartridge.....................60.6MB; ~ 120MB w/compression TAPE FORMAT................................QIC-40 (20 tracks, 10,000 FRPI) RELIABILITY Hard Error Rate...........................1 in 10^14 bits read with ECC MTBF......................................40,000 hours (6% tape motion) PERFORMANCE 10MB file-by-file backup at 500 kb/s transfer rate.........................<6 minutes typical at 250 kb/s transfer rate........................<10 minutes typical End-to-end seek time 205' tape.................................................28 seconds 307' tape.................................................40 seconds Format time 25-4079A tape drive: at 500 kb/s transfer rate 205' tape..............................................36 minutes 307' tape.........................................51 min (approx) at 250 kb/s transfer rate 205' tape..............................................72 minutes 307' tape........................................101 min (approx) POWER REQUIREMENTS 12VDC (+5%)........................................0.8A avg. 2.75A peak <150ms duration 5VDC (+5%).........................................................0.3A Total power...............................................1.5W standby, 11.5W typical TAPE MOTION Speeds and Times Read/Write/Format rate @ 250 kb/s.............................25 ips Read/Write/Format rate @ 500 kb/s.............................50 ips Forward/Reverse/Seek..........................................90 ips ENVIRONMENTAL Temperature Operating.............................................+41° to +113°F (cartridge limited) Shipping and storage........................................-40° to +148°F (-40° to +65°C) Humidity Operating...............................20% to 80% RH non-condensing 80°F (27°C) Maximum dew point (wet bulb) PHYSICAL Overall size (internal drive)...........4.0" wide, 1.625" high, 5.32" deep (101.6 x 41.2 x 135mm) TAPE (FLOPPY) CONTROLLER Type........................................Tandy 3000NL, 4000, 4000LX, 4020LX, 4025LX, 5000MC Encoding method.....................................................MFM Data transfer rates...............................500 kb/s and 250 kb/s Transfer rate selection...............Automatically switches to fastest allowable rate. (Software controlled) COMMUNICATIONS..................................QIC-117 Common Command Set RAM REQUIRED........................................................512 KB (smm 08/05/93)