VGM-450  (25-4049)                 Controls            Faxback Doc. # 6010


             ┌───────────────────────────────────┐
             │                                   │
             │  ┌─────────────────────────────┐  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  └─────────────────────────────┘  │
             │  Tandy VGM-450                    │
             └┬──╔═════════════╗────────┬───┬───┬┘
              │  ║             ║        │   │<──┼───── Power ON/OFF Button
              │  ║             ║      ▄<┴───┴───┼───── Power Indicator
              └──╚═════╤═══════╝▄▄▄──▄▄▄────────┘
                       │         │    │
                       │         │    └───── Contrast
                       │         └────────── Brightness
                 Access Panel
     ┌──────────────────────────────────────┐
     │                                      │
     │   ┌─┐  ┌─┐  ┌─┐  ┌─┐  ┌─┐            │
     │   └─┘  └─┘  └─┘  └─┘  └─┘            │
     │    │    │    │    │    │             │
     └────┼────┼────┼────┼────┼─────────────┘
          │    │    │    │    └─── Vertical Position
          │    │    │    └─── Vertical Size
          │    │    └─── Side Pincushion
          │    └─── Horizontal Position
          └─── Horizontal Size


Contrast:            Adjust this control for the proper contrast level.

Brightness:          Adjust this control for overall brightness of the 
                     display screen.

Power ON/OFF:        To turn on the VGM-450, press POWER. The POWER 
                     indicator lights. Press POWER again to turn off the 
                     monitor.

Horizontal Size:     Adjust this control for the desired width of the 
                     display. Turn clockwise to widen the display or 
                     counterclockwise to narrow it.

Horizontal Position: Adjust this control for the proper horizontal position
                     of the display. Turn clockwise to move the display to 
                     the right or counterclockwise to move it to the left.

Side Pincushion:     Adjust this control to correct vertical lines of the
                     display from bowing out or in. Turn clockwise to make 
                     the display's vertical lines curve out or counter-
                     clockwise to  make them curve in.

Vertical Size:       Adjust this control for the desired vertical size of 
                     the display. Turn clockwise to increase the vertical 
                     size of the display or counterclockwise to decrease 
                     it.

Vertical Position:   Adjust this control for the proper vertical position 
                     of the display. Turn clockwise to move the display up
                     or counterclockwise to move it down.

CAUTION: If the same characters or graphics are shown for a long time with 
the contrast and brightness controls set to their maximum positions, part 
of the screen might be damaged. Use the controls with care.