VGM-390  (250-4091)              Controls              Faxback Doc. # 6119

             ┌───────────────────────────────────┐
             │                                   │
             │  ┌─────────────────────────────┐  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  │                             │  │
             │  └─────────────────────────────┘  │  ┌── Power Indicator
             │  Tandy VGM-390         ▀ ┌───┐<───┼──┴── Power ON/OFF Button
             ├──────────────────────────┴───┴────┤
             ├──▄▄──▄▄──▄▄──────────▄▄──▄▄───────┤
             └───┬───┬───┬───────────┬───┬───────┘
Horizontal Pos.──┘   │   │           │   │
  Vertical Position──┘   │           │   └── Side Pincushion
       Horizontal Size───┘           └── Vertical Size
                              

Contrast - Adjust this control for the proper contrast level.

Brightness - Adjust this control for overall brightness of the display
             screen.

CAUTION:  If the same characters or graphics are shown for a long time
          with the contrast and brightness controls set to their maximum
          positions, part of the screen might be damaged.  Use these
          controls with care.

Horizontal Position - Adjust this control to horizontally position the
                      display.  Turn H-POSI clockwise to move the display
                      to the right or counterclockwise to move it to the
                      left.

Vertical Position - Adjust this control to vertically position the
                    display.  Turn V-SIZE clockwise to move the display
                    up or counterclockwise to move it down.

Horizontal Size - Use this control to adjust the display's width.  Turn
                  H-SIZE clockwise to widen the display or
                  counterclockwise to narrow it.

Vertical Size - Use this control to adjust the display's vertical size.
                Turn V-SIZE clockwise to increase the display's vertical
                size or counterclockwise to decrease it.

Side Pincushion - Adjust this control to correct the display's vertical
                  lines from bowing in or out.  Turn SIDE-PIN clockwise to
                  barrel the display's vertical lines or counterclockwise
                  to dent them.

(smc-02/17/94)