Ultra-Minature Tie  (330-3003)       Installation      Faxback Doc. # 14639
Clip Microphone

INSTALLING THE BATTERY

Your microphone is powered by one 357a alkaline button-cell battery (such
as Radio Shack Cat. No. 23-115).

Follow these steps to install the battery.

1.  Unscrew and separate the battery holder's cap.

2.  Install the battery as indicated by the polarity symbols (+ and -)
    marked above the battery compartment.

3.  replace the cap.

Notes:  To save battery power, turn off the power when not using the
        microphone.

        If you do not intend to use your microphone for several months,
        remove the battery.

        Replace the battery when the output level becomes too low for
        normal use.

        Avoid continuous operation or storage in areas of high temperature
        and humidity.

        Dispose of the used battery properly and promptly.  Do not bury or
        burn it.

        Do not allow children to play with the battery.  Swallowing a
        battery can be fatal.


(SP/all-04/20/95)