Ultra-Minature Tie  (330-3003)        Operation        Faxback Doc. # 14640
Clip Microphone

1.  Insert the microphone cord's 1/8 inch plug into your amplifier or tape
    deck.

    Note:  If your amplifier or tape deck's mic jack is a 1/4 inch type.
           Radio Shack stores carry a suitable adapter plug (Cat. No.
           274-367).

2.  Clip the microphone holder to your tie, lapel, or other piece of
    clothing.  Then insert the microphone into its holder.

3.  Clip the battery holder on your belt or other convenient place.

4.  Turn on the microphone by sliding ON/OFF to ON.

5.  Talk into the microphone and adjust the amplifier's or tape deck's
    volume control for a good sound level.

     Note:  If the amplifier's or tape deck's volume is too loud, you might
            hear a squealing noise.  To stop this feed back, either reduce
            the amplifier's or tape deck's volume speakers so they point
            away from the microphone.

6.  Slide ON/OFF to OFF


(SP/all-04/20/95)