MTA-16 AM/FM Table  (120-0700)      Preparation        Faxback Doc. # 15972
Radio

WARNING:  To reduce the risk of fire or electric shock, do not expose this
          appliance to rain or moisture.

ANTENNA CONNECTIONS

AM Antenna

Your MTA-16 has a built-in ferrite loop stick antenna for AM reception.
Changing the radio's position can enhance AM reception.  Place the radio in
the position that gives you the best reception.

FM Antenna

The AC power cord is the FM antenna.  To connect the power cord antenna,
slip the spade lug at the back of the radio under one of the screw heads
and tighten the screw.

If you need to improve FM reception, disconnect the spade lug.  Then, you
can attach an FM or VHF TV antenna to the screw terminals on the back of
your radio.

If you have an outside VHF TV antenna, you can use a simple signal splitter
to connect your radio and TV set to the same antenna.  Your local Radio
Shack store has a wide selection of antennas and connectors.


(ALL-07/18/95)