8-Inch Wall Baffle  (400-1414)      Installation       Faxback Doc. # 16124
PA Speaker

CONNECTING THE SPEAKER WIRE

Follow the wiring instructions provided with your PA system.

MOUNTING THE SPEAKER

Be sure the mounting surface is at least 3/8-inch thick, and that there is
some clearance behind the mounting surface.  No wall studs or other objects
should block the back of the speaker.

CAUTION:  Be sure not to cut into any existing wiring or plumbing hidden
          behind the wall.

1.  With the supplied template (at right), mark the positions for the
    mounting screws and drill holes slightly smaller than the diameter of
    the screws into each marked location.

2.  Thread the screws into the mounting surface, letting the heads extend
    about 1/4-inch from the wall.

3.  Hang the speaker on the screws.

USING THE VOLUME CONTROL

Rotate the knob on the bottom of the speaker clockwise to increase the
volume, or counterclockwise to decrease it.


(ALL-07/25/95)