Multi-Channel Professional Wireless Microphone Receiver
(320-1233)                Operation                    Faxback Doc. # 16854

1.  Turn on your amplifier, tape recorder, mixing board, and other
    necessary components of your audio system.  Set the volume control (or
    input level controls) to moderate settings.

2.  Fully extend the antenna.

3.  Set the microphone receiver's VOLUME control to 0.

4.  Press the microphone receiver's POWER button to the in (on) position.
    The green power indicator lights.

5.  Set the microphone's OFF/STANDBY/ON switch to ON.  The microphone
    receiver's red READY indicator lights.

6.  Adjust the receiver's volume to the desire level.

7.  Begin talking into the microphone and adjust the receiver's VOLUME
    control to the desired level.

    NOTE:  Experiment with the receiver's volume setting and the settings
           of other components in your audio system to obtain the best
           results.

8.  When you are finished, turn off all your audio equipment and the
    microphone.


(L/all-09/14/95)