AM/FM LED Clock Radio With Automatic Timer and Nightlight (120-1611) Operation Faxback Doc. # 18062 Setting the Time 1. While holding down TIME, repeatedly press (or press and hold down) HOUR until the clock displays the correct hour. Note: The PM indicator on the display lights when you set the time to a PM hour. 2. While holding down TIME, repeatedly press (or press and hold down) MINUTE until the clock displays the correct minute. 3. Release TIME when you have set the correct time. Setting the Alarm 1. While holding down ALARM, repeatedly press (or press and hold down) HOUR until the clock displays the correct hour. NOTE: The PM indicator on the display lights when you set the time to a PM hour. 2. While holding down ALARM, repeatedly press (or press and hold down) MINUTE until the clock displays the correct minute. 3. Release ALARM when you have set the correct alarm time. To view the alarm time, hold down ALARM on the top of the clock radio. Using the Alarm Once you set the alarm time, follow these steps to turn on the alarm. 1. Set ON/OFF/AUTO/ALARM to AUTO to turn on the radio and light at the preset time, or to ALARM to sound the alarm buzzer and turn on the light at the preset time. When you turn on the alarm, the alarm indicator appears at the lower left corner of the display. 2. When the buzzer or radio sounds, set ON/OFF/AUTO/ALARM to OFF to turn it off. NOTE: You can press SNOOZE to silence the alarm for about 9 minutes. You an repeatedly press SNOOZE for up to 2 hours. Then the alarm turns off and sounds again at the set time. 3. Slide ON/OFF/AUTO/ALARM to AUTO or ALARM to reset the alarm to sound at the preset time 24 hours later. Using the Sleep Timer You can set the radio to play for up to 1 hour and 59 minutes, then automatically turn off. 1. Set ON/OFF/AUTO/ALARM to OFF. 2. To set the sleep timer to the maximum 1 hour and 59 minutes, press SLEEP and HOUR at the same time. To set the sleep timer to less than the maximum, while pressing and holding SLEEP, press HOUR to set a time longer than 1 hour then press and hold MINUTE to set the desired sleep time. Playing the Radio 1. Set AM/FM to AM or FM. 2. Set ON/OFF/AUTO/ALARM to ON to turn on the radio. 3. Rotate the tuning control to select your desired station. 4. Adjust VOLUME to a comfortable listening level. NOTES: The AM antenna is built-in. Rotate the clock radio for the best AM reception. The power cord serves as an FM antenna. For the best FM reception, stretch the power cord to its full length. Using the Night Light To turn on the night light, push LIGHT to the left. To turn off the night light, push LIGHT to the right. (EB 11/22/95)