4-Channel Stereo Microphone Mixer
(320-1106)              Powering The Mixer            Faxback Doc. # 18279

USING THE BATTERY POWER

Your can power the mixer with a 9-volt battery (not supplied).  For the
best results and longest battery life, we recommend an alkaline battery
(such as Radio Shack Cat. No. 23-553).

1.  Use a flat-blade screwdriver to loosen compartments cover's screw and
    remove the cover.

2.  Attach the battery snap in the battery compartment to the 9-volt
    battery compartment to the 9-volt battery's terminals.  Then place the
    battery in the compartment.

3.  Replace the cover and tighten the battery compartment cover's screw.

    Replace the battery when the BATTERY LOW indicator on the mixer's upper
    right corner lights.

USING AC POWER

You can power the mixer with AC power by using an optional 9-volt AC
adapter, such as Radio Shack Cat. No. 273-1455.

CAUTION:  The recommended AC adapter supplies 9 volts DC and delivers 300
          milliamps.  Its plug properly fits the mixer's DC 9V jack and its
          center tip is set to negative (-).  Using an adapter that does
          not meet these specifications could damage the mixer or the
          adapter.

1.  Insert the AC adapter's barrel plug into the DC 9V jack on the back of
    the mixer.

2.  Plug the AC adapter's power module into a standard AC outlet.


(CS 11/9/95)