Multi-Channel Dual Antenna Microphone Receiver
(320-1234)                Operation                  Faxback Doc. # 18438

USING THE RECEIVER

1. Turn on your amplifier, tape recorder, mixing board, and other necessary
   components of your audio system.  Set the volume control (or input level
   controls) to moderate settings.

2. Set the microphone receiver's VOLUME control to 0.

3. Press the microphone receiver's POWER button to the in (on) position.
   The green power indicator lights.

4. Set the microphone's OFF/STANDBY/ON switch to ON.

5. Begin talking into the microphone and adjust the receiver's VOLUME
   control to the desired level.

   NOTES: Experiment with the receiver's volume setting and the settings of
          other components in your audio system to get the best results.

          The ANT 1 and ANT 2 READY indicators light when the receiver is
          receiving a signal.  If either indicator does not light, the 
          microphone is out of range of the corresponding antenna.

6. When you are finished, turn off all your audio equipment and the
   microphone.


(JC   11/9/95)