CD Radio Cassette-Corder (140-0544) The CD Player Faxback Doc. # 19553 PLAYING MULTIPLE DISCS You can play up to 6 CDs one after another. 1. Press one of the DISC 1 to 6 buttons to select the disc tray. 2. Press /\ OPEN/CLOSE on the player and place a CD on the disc tray. 3. Press /\ OPEN/CLOSE on the player to close the disc tray. The number of the disc tray where the CD is inserted appears in the display. To insert more discs, repeat steps 1 to 3. 4. Press DISC MODE to select "ALL DISCS." 5. Press one of the DISC 1 to 6 buttons to select the disc you want to start playing. Play starts from the selected CD and the indicator of the selected disc tray blinks slowly. NOTE: Place one CD only on the disc tray. If you place two or three CDs and close the disc tray, you will not be able to pull out the tray. TIP: To play only one CD, press DISC MODE to select "1 DISC." USING THE DISPLAY You can check information about the disc by using the display. Checking The Total Track Numbers and Playing Time Press DISPLAY in stop mode. If the disc has more than 16 tracks, "OVER 16" appears in the display. Checking The Remaining Time Press DISPLAY while playing a disc. The track numbers in the music calendar disappear after they are played. To display Press DISPLAY ___________________________________________________________ Remaining time on the Once current track* ___________________________________________________________ Remaining time on the disc Twice and the number of tracks left** ___________________________________________________________ Playing time and the current Three times track number ___________________________________________________________ * For a track whose number is more than 16 the remaining time appears as "--:--". ** If the remaining tracks are over 99, "--" appears instead of the track number. If the remaining time is over 99 minute, "--:--" appears instead of the remaining time. LOCATING A SPECIFIC TRACK You can quickly locate any track using the number buttons. You can also find a specific point in a track while playing a disc. To Locate Press ______________________________________________________________ a specific track directly one of the DISC 1 to 6 buttons to select the disc and a number button of the track. ______________________________________________________________ a point while listening to >> (forward) or << the sound (backward) while playing and hold down until you find the point. ______________________________________________________________ a point while observing >> (forward) or << the display (backward) in pause and hold down until you find the point. When you use the buttons on the player, use |<>| AMS/SEARCH. ______________________________________________________________ Locating A Specific Disc By Scanning The First Track Of Each Disc 1. Press STOP PLAYBACK (button with a square). "CD" appears in the display. 2. Press DISC MODE to select "ALL DISCS." 3. Press DISC SCAN on the player. The player starts scanning the first track of each disc for 10 seconds. Scanning always starts from the disc in DISC 1 no matter what disc number is selected. NOTE: You cannot start play if "PGM" or "SHUF REP" is lit in the display. Turn off the indication by press STOP PLAYBACK. TIP: When you locate a track numbered over 10, press > 10 first, then the corresponding number buttons. Example: To play track number 23, press >10 first, then 2 and 3. PLAYING TRACKS REPEATEDLY (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes, see below. Playing Discs Repeatedly Using ONE-TOUCH CD RELAY Buttons Press either CONTINUE or SHUFFLE. To play all CDs repeatedly Press ______________________________________________________________ In numerical sequence CONTINUE. "ALL DISCS REP ALL" appears in the display. ______________________________________________________________ In random order SHUFFLE. "ALL DISCS SHUF REP ALL" appears in the display. ______________________________________________________________ Playing Tracks Repeatedly 1. Press PLAY MODE/MONO/ST until the repeat mode you want appears in the display. To repeat Select ______________________________________________________ a single track REP 1 ______________________________________________________ all the tracks REP ALL ______________________________________________________ tracks in random order SHUF REP ALL ______________________________________________________ programmed tracks PGM REP and then program tracks (see steps 3-5, below). _______________________________________________________ 2. Do either of the following to start repeat play: * When you've selected REP1, select the disc by pressing one of the DISC 1 to 6 buttons, then select the track by pressing the number button. * When you've selected REP ALL, press DISC MODE to select "ALL DISCS" (to repeat all discs) or "1 DISC" (to repeat only 1 disc). If you select "1 DISC," then press one of the DISC 1 to 6 buttons to select the disc you want. * When you've selected SHUF REP ALL, press DISC MODE to select "ALL DISCS" (to repeat tracks in all discs in different order) or "1 DISC" (to repeat only one disc in different order). Then, press >. * When you've selected PGM REP ALL, press >. CREATING YOUR OWN PROGRAM You can make a program of up to 20 tracks from all the CDs in the order you want them to be played. 1. Press PLAY MODE/MONO/ST until "PGM" appears in the display. 2. Press DISC MODE to select "ALL DISCS". 3. Press one of the DISC 1 to 6 buttons to select the disc tray. 4. Press the number buttons for the tracks you want to program in the order you want. You can program up to 20 tracks. Programmed tracks appear in the music calendar. If you made a mistake, press CLEAR and re-enter the track number. To program additional tracks from another disc, repeat steps 3 and 4. 5. Press > to start program play. TIPS: You can select the track on the player. Press |<>| AMS/SEARCH, then press ENTER/MEM instead of the number buttons. You can program one whole CD as one program step. Repeat step 3 and select another disc tray by pressing one of the DISC 1 to 6 buttons. To Cancel Program Play Press PLAY MODE/MONO/ST until no indication appears in the display. To Check The Order Of Tracks Before Play Press >> /PEM CHECK on the remote or ENTER/MEM on the player. Every time you press the button, the track number appears in the programmed order. To Change The Current Program To Do This _______________________________________________________________ Erase the last track in 1. Press CLEAR. Every time you the program press the button, the last track in the program is cleared. 2. Re-enter the track numbers. _______________________________________________________________ Change the whole Press STOP PLAYBACK. Then create program completely. a new program following the programming procedure. _______________________________________________________________ TIPS: You can play the same program again, since the program is saved until you open the disc tray. You can record your own program. After you've created the program, insert a blank tape and press REC to start recording. (CS 2/26/96)