DCT-2000
(140-0675)                  Connections                Faxback Doc. # 19792

Some digital audio devices have digital jacks in addition to analog jacks.
Digital connections let digital information pass from a digital audio
device (example: CD player) to the DCC deck without digital-to-analog
conversion.  This eliminates distortion and signal degradation, resulting
in exact copies of digital programs.

This unit has two sets of digital jacks--coaxial (phono) and optical.

To connect a digital audio device to the DCC deck's coaxial jacks, use a
75 Ohm coaxial cable such as RS Cat. No. 150-1518.  Connect the digital
audio device's digital coaxial output jack to the DCC deck's audio device
COAXIAL IN jack.  If the digital audio device has a digital coaxial input
jack, connect it to the deck's COAXIAL OUT jack.

To connect a digital audio device to the DCC deck's optical jacks, you
need the appropriate fiber-optic cable and connectors (JAE standard).
Pull out the protective plug from the DCC deck's OPTICAL IN jack.  Then
connect the digital audio device's optical output jack to the OPTICAL IN
jack.  If the digital audio device has an optical input jack, connect it
to the deck's OPTICAL OUT jack.

NOTE:  This DCC deck is designed to accept either coaxial digital input
       or optical digital input.  Connect only one of these inputs to the
       deck.  Connecting both digital inputs might result in recording
       difficulties.


(IR-02/26/96)