Auto-Reverse Sony Pressman
(140-1179)                 Power Sources              Faxback Doc. # 19877

PREPARING A POWER SOURCE

Choose one of the following power sources.

DRY BATTERY

Make sure that nothing is connected to the DC IN 3V jack.

1.  Open the battery compartment lid.

2.  Insert two size AA (R6) batteries (not supplied) with correct polarity
    and close the lid.

NOTES:  In some cases when the unit is used with rechargeable batteries,
        only the (light) REC/BATT and (light) BATT lamps will light even
        though the batteries have been fully charged.

        After the batteries have been used for a while, the BATT lamp(s)
        may flash with the playback sound when you turn up the volume;
        however, this does not mean that you need to replace the
        batteries.

        The unit will play back normally for a while even after the
        REC/BATT lamp dims.  However, replace the batteries as soon as you
        can.  If you do not, a loud noise may be emitted by the built-in
        speaker or subsequent recording will not be done correctly.

BATTERY LIFE (Approximate hours)

                                    Playback                Recording

Sony alkaline LR6 (SG)              7.5                     9
Sony SUM-3 R6P (SR)                 2                       2

NOTES:  Do not charge a dry battery.

        Do not use a new battery with an old one.

        Do not use different types of batteries.

        When you do not use the unit for a long time, remove the batteries
        to avoid any damage caused by battery leakage and subsequent
        corrosion.

        Dry batteries will not be expended when another power source is
        connected.

HOUSE CURRENT

Connect the AC power adapter to DC IN 3V and to the wall outlet.  Use the
AC-E30HG AC power adapter (not supplied).  Do not use any other AC power
adapter.


(LB/all-03/07/96)