Stereo Mate  (120-0451)           Operation            Faxback Doc. # 3687

PLAYING THE RADIO

Warning:  Before you turn on the radio, turn VOLUME to its lowest
          setting.  After you turn on the radio, slowly adjust the
          volume to a comfortable listening level.

1.  To listen through headphones, plug the headphones' 1/8-inch plug
    into the radio's PHONES jack.

    To listen to FM stations through the radio's built-in speaker,
    insert the supplied FM antenna into the radio's PHONES jack.

    Note:  Adjust the radio's position for best AM reception.  For best
           FM reception, fully extend the FM antenna or the headphone
           cord.

2.  To listen through the radio's built-in speaker, set switch to
    SPEAKER.

    To listen through headphones, set it to HEADPHONES.

3.  Set POWER OFF/ON to ON to turn on the radio.

4.  Set FM ST/FM/AM to the desired band.

    Note:  For weak FM stereo stations, set the switch to FM.  You get a
           mono (monaural) signal, but the reception might improve.

5.  Turn TUNING to the desired station.

6.  Adjust VOLUME to a comfortable listening level.

7.  Set POWER OFF/ON to OFF to turn off the radio.

LISTENING SAFELY

To protect your hearing, follow these guidelines when you use the radio,
especially when wearing headphones.

    Do not listen at extremely high volume levels.  Extended high-volume
    listening can lead to permanent hearing loss.

    Once you set the volume, do not increase it.  Over time, your ears
    adapt to the volume level, so a volume level that does not cause
    discomfort might still damage your hearing.

TRAFFIC SAFETY

Do not wear headphones while operating a motor vehicle or riding a
bicycle.  This can create a traffic hazard and is illegal in some areas.

Even though some headphones are designed to let you hear some out-side
sounds when listening at normal volume levels, they still present a
traffic hazard.

(br/all-12/19/94)